Aerial view of a narrow wooden bridge connecting two lush green forested areas across calm water with reflections of the sky.
0:00
education

Why should I care about concentration risk?

TreasurySpring
November 18, 2026
4 min

Low-angle view of modern white high-rise buildings with blue glass windows and rows of balconies against a clear blue sky.

Most finance teams keep their surplus cash with the same banks they rely on for credit facilities and everyday payments. That feels safe. The relationships are long-standing, and the money is spread across more than one institution. But even when cash is split between a number of banks, with a government money market fund added on top, most of it can still depend on a handful of names. This kind of exposure, known as concentration risk, can show up in monthly reports, though how and where it appears depends on the report type and what it tracks.

What is concentration risk?

Concentration risk means that a big part of a portfolio depends on a single source, such as one bank or one type of investment. If that one source fails, the loss can be much bigger than the rest of the portfolio can handle. The term is used in many areas, from stock portfolios with just a few main holdings to companies that depend on one big customer.

Concentration risk usually shows up in three ways: counterparty concentration occurs when too much cash sits with one bank or issuer, increasing the risk tied to that name; credit concentration happens when every position relies on the same kind of protection, which is usually nothing more than a bank's promise to repay; maturity concentration occurs when a large share of holdings matures at the same time.

Why concentration risk matters for corporate cash

Cash is supposed to be the safest part of the balance sheet, so its risks often get less attention. But cash concentration deserves as much focus as any other major risk for three reasons:

Large balances sit far above FDIC insurance limits

The FDIC insures deposits up to $250,000 per depositor, per insured bank, for each ownership category, and a company's accounts at one bank generally count toward a single $250,000 limit. A business with $20m at one bank therefore has just over 1% of that balance insured. Everything above the limit is an unsecured claim on the bank, so if the bank fails, the business depends on what the receivership recovers and how quickly.

Some treasurers use reciprocal deposit networks to split large balances into insured amounts across many banks, which extends FDIC coverage while keeping the cash in bank deposits. For balances held directly, the bigger the balance, the more it rests on the bank's own financial condition.

Market stress can move faster than it used to

Online and mobile banking mean deposits can now leave a bank within hours. When confidence in a bank weakens, large depositors can move their money before others have had time to react. During the US regional banking stress of spring 2023, the Financial Stability Board found that some affected banks lost 20%–30% of their deposits in a single day, several times the pace of earlier bank runs. A business with most of its cash in one place has very little time to respond when conditions change.

Severe events are rare, and most treasurers will never face a bank failure themselves. The cost of having too much in one unsecured position is still high enough that boards, audit committees, and auditors increasingly ask how exposure is spread.

Banks are held to a stricter standard

Under the Federal Reserve's single-counterparty credit limits, US bank holding companies with $250bn or more in assets can't let their credit exposure to any one counterparty exceed 25% of tier 1 capital, and global systemically important banks face a tighter 15% limit on exposures to other systemically important firms. 

Banks also place much of their own short-term cash on a secured basis through the repo market, taking Treasuries and other high-quality securities as collateral. Corporate cash often doesn't get this level of discipline. A company that would never let one customer make up half its revenue might still keep half its cash with one bank.

Where concentration risk hides in a portfolio

Relationship banking

Deposit balances often support the wider banking relationship, from credit facilities to treasury management services, and many US banks offer earnings credits on operating balances to offset service fees. This gives businesses good reasons to keep money with their main banks, and these balances often grow over time. As a result, two or three banks may end up holding most of the cash, even though no one planned for that level of exposure.

Money market funds

A money market fund spreads cash across many short-term instruments, which looks like diversification in a single holding. In the US, most institutional cash sits in government funds, which hold Treasury and agency securities alongside repo with the Federal Reserve and a similar group of large dealer banks. Institutional prime funds draw on a fairly small pool of highly rated bank and corporate issuers, so different funds often hold many of the same names. 

A company with money in three money market funds may have less variety than it appears. Funds disclose their holdings each month, including in Form N-MFP filings with the SEC, but few treasury teams compare these reports across all their funds.

Unsecured exposure

Spreading cash across several unsecured deposits lowers exposure to any single bank, which is a good first step for most teams. But every position still relies on each bank's ability to repay in full. If the whole sector is under stress, unsecured bank deposits often come under pressure at the same time. So a portfolio of five unsecured deposits can end up acting like a single position.

Maturity clustering

Concentration can also happen with timing, not just counterparties. If a large part of the holdings matures in the same week, the business has to make a big reinvestment decision all at once. It then has to accept whatever rates and credit conditions are available at that time. Spreading maturities over weeks and months reduces this pressure and helps with managing liquidity risk.

How to measure your concentration risk

To measure concentration, start with a full list of where the cash is held, organized by who ultimately owes the money rather than by account or product. For a bank deposit, that is simply the bank holding the money. For a fund, look at the issuers listed in the fund's holdings report, if that data is available. Group entities under the same ownership, like a bank and its subsidiaries, as one exposure.

Then show each exposure as a percentage of total cash. A simple table of the largest counterparties, showing each rating and whether the cash is secured, gives the CFO and board a clear picture. Many treasury policies set a maximum share for each counterparty, often based on credit rating, with lower limits for unsecured exposure.

For board reports, some teams include a concentration ratio like the Herfindahl-Hirschman Index, the same measure the US Department of Justice uses to assess market concentration. This adds up the squares of each counterparty's percentage share, so if one counterparty holds everything, the score is 10,000. A well-diversified portfolio scores much lower. Tracking this number each quarter shows if exposure is spreading out or becoming more concentrated.

A worked example

Take a business with $50m in surplus cash, split across three banks: $30m at its main bank, $15m at a second bank, and $5m at a third. That gives shares of 60%, 30%, and 10%, and a Herfindahl-Hirschman score of 4,600. All $50m relies on unsecured bank credit.

Now suppose the business keeps $20m at its main bank and $10m at its second bank, and spreads the remaining $20m across eight other counterparties at $2.5m each, such as US Treasury bills and secured bank lending. The score drops to 2,200, and $20m, or two-fifths of the cash, no longer depends on unsecured bank credit.

Limits only work if the team applies them every time it places cash. Writing them into the treasury policy sets the standard, but the investment process must enforce them consistently.

The TreasurySpring platform lets finance teams set investment guidelines that reflect the limits agreed in their treasury policy. Each new investment is then checked against those guidelines, helping cash allocations stay within the approved risk framework.

Reducing concentration without disrupting bank relationships

Reducing concentration doesn't mean moving all balances away from your main banks. Operating cash and balances that support credit lines can stay put, while surplus cash above that amount should be spread more widely. Diversification here means spreading surplus cash between a wider set of borrowers and staggering when each investment matures.

Two changes usually make the biggest difference to a concentrated position. First, moving some bank exposure from unsecured deposits to secured lending through tri-party repo means an independent agent holds collateral backing the cash. Second, adding US Treasuries, other highly rated governments, and investment-grade corporates as counterparties reduces overall reliance on the banking sector.

TreasurySpring is designed to give large businesses, private funds and multinationals access to more than 120 counterparties through a single onboarding. Secured bank exposure is placed through the tri-party repo market, and each position sits with a single, named counterparty rather than in a pooled fund. Our guide to diversification in investing explains how to build this mix across a wider portfolio.

Knowing where your cash sits

It's easy to miss concentration risk because cash spread across several banks and funds can look diversified on paper. True diversification means knowing exactly who stands behind each position and how well it's protected. It also means knowing when each one falls due. A treasury team that checks this regularly can explain its exposure to the board before a market event makes it urgent.

The steps are practical. Start by mapping where the cash sits, then set clear limits and widen the range of counterparties your business can use. Contact TreasurySpring to review where your cash is concentrated and how a wider, secured set of counterparties could fit your investment policy.

For anyone who can't tell the difference between their SEC and their ASC, we've introduced our Treasury & Cash Investment Glossary.

*TreasurySpring’s blogs and commentaries are provided for general information purposes only, and do not constitute legal, investment or other advice.

Subscribe to Insights

Explore flexible, diversified funding, built around your requirements.

We may use your contact details to follow up on your enquiry and to share information about similar products or services that may be relevant to you. You can opt out at any time. For more information, please see our privacy policy.
Subscribe
Thank you!
Your submission has been received. We will get back to you as soon as possible.
Oops! Something went wrong while submitting the form. Please try again.